The analyzer is designed for measuring SWR (standing wave ratio), return loss, cable loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 1500 MHz. A built-in ZOOM capability makes graphical measurements especially effective. An integrated Time Domain Reflectometer mode can be used to locate a fault within the feedline system. The analyzer is equipped with a Bluetooth Low Energy module for a wireless connection with your laptop, tablet, or smartphone.
Measurement for systems
- 25, 50, 75, 100, 150, 200, 300, 450 and 600 Ohm
SWR measurement range
- 1 to 10 in chart modes
- 1 to 100 in numerical modes
R and X range
- 0…1000, -1000…1000 in chart modes
- 0…10000, -10000…10000 in numerical modes
Display modes
- Optional open-short-load calibration
- R, X chart, 20 to 500 points
- Return loss chart, 20 to 500 points
- Smith chart, 20 to 500 points
- SWR at single or multiple frequencies
- SWR chart, 20 to 500 points
- SWR, return loss, R, X, Z, L, C at single frequency
- TDR chart (Time Domain Reflectometer)
- Сable tools (StubTuner, Cable Length, Impedance, Loss measurements)
RF output
- Connector type: N
- Output power: -10 dBm (at a load of 50 ohms)
- Output signal shape: square
Power
- Max. 4 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used
- Three 1.2V Ni-MH batteries, type AA
- Three 1.5V alkaline batteries, type AA
- When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
Interface
- 320×240 color TFT display
- 6x3 keys on the water-proof keypad
- Bluetooth Specification v.4.2, LE
- Menus and help screens in English (by default), Japanese, Spanish
- USB connection to a personal computer
Dimensions
- 98 × 230 × 53 mm, (3.9 × 9.0 × 2.0 in)
Accessories inside the box
- Soft case, battery charger, rechargeable batteries, USB cable, N to UHF adapter
Note
- Specifications are subject to change without notice
- Мade in Ukraine