TELESCOPING MASTS
$172.00
UPS SHIPPABLE
PLEASE NOTE: All installations must be guyed or bracketed.  Installation of masts should be done by experienced professionals.
Telescoping masts are not recommended by the manufacturer for commercial, CB, or beam antenna installations.
ROHN 9H50 TELESCOPING MAST
The ROHN 9H50 Telescoping Mast is pre-galvanized for corrosion
protection and comes assembled with hardware. It is meant for
use in guyed or bracketed installations. Please note that guys, guy
wire, anchors, and base mount are not included. Height refers to
overall pipe length. Actual assembled height will be less due to
overlapping.  

34 lbs

Bottom: 2.25" OD x 18 Gauge
              2.00" OD x 18 Gauge
              1.75" OD x 18 Gauge
              1.50" OD x 18 Gauge
Top:        1.25" OD x 16 Gauge

Shipping Length: 99"
Assembled Height: 410"
ROHN H20 TELESCOPING MAST
The ROHN H20 Telescoping Mast is pre-galvanized for corrosion
protection and comes assembled with hardware. It is meant for
use in guyed or bracketed installations. Please note that guys, guy
wire, anchors, and base mount are not included. Height refers to
overall pipe length. Actual assembled height will be less due to
overlapping.  

17 lbs
OD Bottom: 1 1/2"
OD Top: 1 1/4"
Shipping Length: 123"
Assembled Height: 231"
$60.00
SHIPS BY FREIGHT ONLY OR LOCAL PICK UP
ROHN ETMB
Universal Roof Mount
ROHN GTMBL
Ground Mount
ROHN GAS604
Screw Anchor
Easy Up EZ32A
Heavy Duty Base Plate
EASY UP EZ 30-18
18" Wall Mount
Easy Up EZ TM-30-U
Telescoping Mast
All towers, poles, and masts must be installed and dismantled by experienced and trained personnel.

All installations must be thoroughly inspected by qualified personnel and remarked as required with hazard and warning labels at least twice a year to ensure safety and proper performance.

All installations must be grounded per local and national codes.

The mixing of so-called interchangeable copies of ROHN products is dangerous and voids all data or warranty supplied by ROHN. Materials used by others are not the same quality and have not been tested or checked by
ROHN to conform to the same quality standards. Mixing of non-ROHN items may endanger lives and cause serious failures and financial misfortune for all concerned.
ROHN H50 TELESCOPING MAST
The ROHN H50 Telescoping Mast is pre-galvanized for corrosion
protection and comes assembled with hardware. It is meant for
use in guyed or bracketed installations. Please note that guys, guy
wire, anchors, and base mount are not included. Height refers to
overall pipe length. Actual assembled height will be less due to
overlapping.  

46 lbs
OD Bottom: 2 1/4"
OD Top: 1 1/4"
Shipping Length: 123"
Assembled Height: 527"
$169.00
SHIPS BY FREIGHT ONLY OR LOCAL PICK UP
Easy Up EZ TM-50-U
Telescoping Mast
Easy Up EZ TM-20-U
Telescoping Mast
** IMPORTANT **
When ordering any  items designated as LTL Freight only - you must choose the FREIGHT method
at checkout or your order will not be processed.

If you would prefer to pick up at our Mt Carroll IL location please choose
IN-STORE PICKUP

Click here for important shipping information!