GROUND RODS & CLAMPS
| ROHN BGK3G Grounding Kit |
| ROHN CW4ST #4 Copper Wire |
| ROHN 25G 10' Section |
ROHN PART NUMBER: GR8G
GALVANIZED GROUND ROD WITH CLAMP
5/8' X 8'
WEIGHS 9 LBS
$23.10
GALVANIZED GROUND ROD WITH CLAMP
5/8' X 8'
WEIGHS 9 LBS
$23.10
 |  |  |  |  |  |
ROHN PART NUMBER: GR8C
COPPER CLAD GROUND ROD WITH CLAMP
5/8' X 8'
WEIGHS 8 LBS
$31.87
COPPER CLAD GROUND ROD WITH CLAMP
5/8' X 8'
WEIGHS 8 LBS
$31.87
ROHN PART NUMBER: CPC.5/.75
LUG FOR 1/2" TO 3/4" ROD
$22.00
LUG FOR 1/2" TO 3/4" ROD
$22.00
| Easy Up EZG-6 Grounding Kit |
ROHN PART NUMBER: CPC1/1.25
LUG FOR 1" TO 1-1/4" TOWER LEG (25G/45G TOWER).
$38.00
LUG FOR 1" TO 1-1/4" TOWER LEG (25G/45G TOWER).
$38.00
ROHN PART NUMBER: 340016T
For 5/8" Ground Rod
ROHN Ground Rod Clamps are tinned bronze and slip over
the end of a copper or copper-clad ground rod and hold a
ground conductor in place by compression.
Their compression bolt is a strong hex-head fine thread bolt
that applies pressure to the conductor and ground rod.
This high pressure creates a low-resistance connection for
effective grounding.Tinned bronze is corrosion resistant.
$16.50
For 5/8" Ground Rod
ROHN Ground Rod Clamps are tinned bronze and slip over
the end of a copper or copper-clad ground rod and hold a
ground conductor in place by compression.
Their compression bolt is a strong hex-head fine thread bolt
that applies pressure to the conductor and ground rod.
This high pressure creates a low-resistance connection for
effective grounding.Tinned bronze is corrosion resistant.
$16.50
ROHN PART NUMBER: 340017T
For 3/4" Ground Rod
ROHN Ground Rod Clamps are tinned bronze and slip over
the end of a copper or copper-clad ground rod and hold a
ground conductor in place by compression.
Their compression bolt is a strong hex-head fine thread bolt
that applies pressure to the conductor and ground rod.
This high pressure creates a low-resistance connection for
effective grounding.Tinned bronze is corrosion resistant.
$3.50
For 3/4" Ground Rod
ROHN Ground Rod Clamps are tinned bronze and slip over
the end of a copper or copper-clad ground rod and hold a
ground conductor in place by compression.
Their compression bolt is a strong hex-head fine thread bolt
that applies pressure to the conductor and ground rod.
This high pressure creates a low-resistance connection for
effective grounding.Tinned bronze is corrosion resistant.
$3.50
ROHN PART NUMBER: 5006
COPPER CLAD GROUND ROD WITH CLAMP
1/2" X 6'
(Replaces Rohn Part Number GR386)
WEIGHS 4 LBS
$33.75
COPPER CLAD GROUND ROD WITH CLAMP
1/2" X 6'
(Replaces Rohn Part Number GR386)
WEIGHS 4 LBS
$33.75