MADE IN THE USA
TIPPERS
Commercial-grade, Penninger Radio Tipper™ systems make managing large masts and antennas easy.
Erect tall masts with only one person!

How? Simply assemble the mast horizontally on the ground and attach antenna, camera, or emergency-
lighting, then "tip" mast to a vertical position.

Watch a Tipper™ setup video here.

~~ Items listed are in stock and ship within 1 business day unless otherwise noted ~~
TP-24
Tipper, Portable with Folding Legs

A portable tipping base for your mast. Designed for FIRST
RESPONSE EMERGENCY COMMUNICATIONS in mind, this base
is intended to deploy rapidly in the field. The folding legs adjust for
uneven terrain and fold up for compact portability. The TP-24 is
designed to handle a 36 foot mast with a vertical antenna on top.
The optional mast clamps have a convenient mounting hole for guy
wire connection. Also great for FIELD DAY or camping.
$349.95
TC-24
Tipper Concrete Mount

Mount your Tipper on a concrete pad using 1/2" J-bolts or 1/2"
threaded rod.
$314.95
TR-24
Tipper Roof Mount with Brace Struts & Mount Pads

This Tipper can be configured to tip along the ridge or down the
slope, please specify when ordering.
$359.95
TT-24
Tipper Tire Mount

Tipper, tire mount drive on with plate
Mount plate is 1/2" x 10" x 24"
Tire Mount & Tipper included.
$359.95
TH-24
Tipper Hitch Mount

Mount your Tipper on your hitch.
Hitch Mount not included (see HML-24)
$299.95
HML-24
Hitch Mount

Hitch Mount for Tipper, Flat for 2" receiver. Tipper not included.
$79.95
HMTJ-200HD
Hitch Mount Tipper Junior for 2" Receiver

The Tipper Jr. is a tipping antenna mast for mounting on a 2" trailer
receiver hitch. A Rugged, Fast, Safe, and Cost effective portable
mast mounting solution for antennas, elevated emergency lighting,
or elevated remote control cameras.

To mount a 2" mast tube, use the optional MC-200 Mast Clamps.

SPECIFICATIONS:
-- From center of hitch pin to Tipper is 7".
-- The Tipper Junior protrudes 6" below the hitch mount.
-- Pivot tube is heavy duty 1/4" wall
-- All aluminum components with stainless steel bolt sets
$254.95
TP-24S-35-8
35' Tipper™ Mast Package

This commercial-grade, Penninger Radio Tipper™ mast mount
makes managing tall masts and antennas easy. The Tipper™ base
allows the mast to be assembled horizontally on the ground and then
"tipped" into the vertical position on a heavy duty load-bearing pivot.
This unique design simplifies erecting the large 35 foot tall mast by
a single person. It works well with a married person too! All heavy-
duty aluminum construction and stainless steel fittings insures long-
life and rugged performance. The mast can support an antenna,
camera, or emergency lighting at a height of 35'

SYSTEM SPECIFICATIONS:
-- 6061 Grade Aircraft Aluminum
-- Stainless steel fittings
-- One TP-24S, standard Portable Tipper
-- Four AT-2000-12508, 8 foot mast sections
-- Four MC-200, mast clamp for 2" OD mast
-- Four GS-750, 3/4" x 20" ground stake
-- One GC-200, guy clamp
$788.50


Out of  
Stock
TC-24-35-8
35'  Concrete-Mount Tipper™ Package

The TC-24 concrete base mount Tipper™ measures 25" x 5.5" x
5.5" and includes a 24" x 2" x 1/8" fold-over tube (starter tube). The
starter tube is drilled near the bottom to accommodate the pivot and
a top wing nut / bolt stop holds the tube upright for normal use. The
base plate is 7" wide with 3/8" holes. These corner mounting holes
are spaced 5.5" on centers.
Designed specifically to mount directly to concrete pad, deck or
other flat surface, 1/2" pre-drilled holes allow customized installation
using 1/2" J-bolts or threaded rod.

SPECIFICATIONS:
-- 6061 Grade Aircraft Aluminum
-- Stainless steel fittings
-- One TC-24, Standard concrete mount tipper
-- Four AT-2000-125-8, 8 foot mast section
-- Four MC-200, mast clamp for 2" OD mast
-- One GC-200, guy clamp for 2" OD mast
$709.95
TP-24ST-33-5

33' Snap Tube™ Tipper™ Mast System

This commercial-grade, Penninger Radio Tipper™ mast mount
makes managing tall masts and antennas easy. The Tipper™ base
allows the mast to be assembled horizontally on the ground and then
"tipped" into the vertical position on a heavy duty load-bearing pivot.
This unique design simplifies erecting the large 33 foot tall mast by
a single person. It works well with a married person too! All heavy-
duty aluminum construction and stainless steel fittings insures long-
life and rugged performance. See how the Tipper™ works in
Tipper™ setup video (tire-mount not included in this system). The
mast can support an antenna, camera, or emergency lighting at a
height of 33 feet.  

SYSTEM SPECIFICATIONS:
-- 6061 Grade Aircraft Aluminum
-- Stainless steel fittings
-- 1 - TP-24ST, Tipper with snap tube starter tube
-- 6 - ST-200-5, 5 foot snap tube section
-- 5 - STJ-200, snap tube joiner
-- 1 - snap tube joiner with flange for slip ring
-- 1 - SR-200, slip ring
-- 4 - GS-750, 3/4" x 20" ground stake
$875.95


Out of
Stock
TT-24ST-33-6

33' Tipper™ Portable Antenna Mast System
with Tire Mount

This commercial-grade, Penninger Radio Tipper™ mast mount
makes managing large masts and antennas easy. The Tipper™
base allows the mast to be assembled horizontally on the ground
and then "tipped" into the vertical position on a heavy duty load-
bearing pivot. The system is highly portable but still very stable as a
result of the tire-mounted Tipper base plate. Simply position a
vehicle tire on top of this base plate and the Tipper™ base is
completely secure. This unique design simplifies erecting a large 33
foot tall mast by only a single person. It works well with a married
person too! All heavy-duty aluminum and stainless-steel construction
insures long-life and rugged performance. See how it works with our
33 foot Tipper™ setup video. The mast can support an antenna,
camera, or emergency lighting at a height of 33 feet.

System includes everything in the
Tire-mount Tipper™ setup video.
Since every installation is different the antenna and coaxial cable
are sold separately.

SYSTEM SPECIFICATIONS:
-- Three lengths of our 3/16" guy rope 40 feet long, three 3/4" x 20"
guy stakes, five 6 foot snap tubes, three guy tension blocks, the
Snap Tube™ joiners and slip ring. (one - TT-24ST, four - STJ-200,
one - STJS-200, one - SR-200, five - ST-200-6, three - GS-750,
three - GTB-250, three - GR-188-40).
$878.65
** Click on an image to enlarge it **