VIA Bravo II Analyzer
Part Number: 6014-5250

100 kHz to 200 MHz Vector Impedance Analyzer with Dual N
Ports (S11 and S21)

Includes: Bravo PC Vision Software, App Notes, Manual on
CD-Rom, Serial Cable, AC Adapter 100-240 VAC, Belt Case,
and N Male Termination Kit (short/50 ohm load)

Operates on 8 AA Batteries or AC adapter.

The VIA Bravo II is a handheld Vector Impedance Analyzer for
measuring the impedance and resonant frequencies of circuits
and antennas. The VIA Bravo has the capability of providing
accurate measurements and sweep displays of impedance,
reactance, resistance, phase angle, return loss and SWR.
The VIA Bravo II's testing functionality, combined with its
100 kHz to 200 MHz frequency range, make it a versatile tool
for many service applications including areas such as MRI,
wireless telemetry, 2-way radio, aviation, and Radio Frequency
Identification (RFID).

The Bravo PC Vision Software application, included with the
VIA Bravo II, provides the user with the capability of remotely
operating the VIA Bravo II through a serial port connection
while viewing real time results on a PC. A Smith Chart display
of the measured circuit impedances is also available. The
PC Vision Software makes the capture, storage, and printing of
documentation and reports easy.
The VIA Bravo II has proven to save time, improve on reliability
and quality, and reduce service wait time.
  • Large numeric display of Center Frequency graph values and Inductance or
    Capacitance values
  • Simultaneously view two separate plots with differing scales
  • Measure parallel or series resistance and reactance
  • Automatic calibration and self-test
  • Cable/Fixture Nulling
  • Nonvolatile memories for both plot storage and set up data
  • Signal generator mode - CW signal generator
  • Windows Bravo PC Vision software included
         Real time display of plots on PC
         Smith Chart display
         Easy transfer of memories in unit to software
  • EL Backlit SuperTwist LCD Display for sharp contrast
  • Auditory cues for non-visual tuning
  • Lightweight & portable

  • Made in the USA
  • Saves time
  • Improves reliability
  • Reduces service wait time
  • Improves quality

  • Frequency Range: 100 KHz to 200 MHz
  • Tuning/Display Resolution: 0.02% of center frequency
  • Measurement Speed: ~2 sweeps/second
  • Frequency Display Width:
         0 to 51.6 MHz/80 data points/large numeric readouts
         0 to 64 MHz/100 data points/large numeric readouts
  • Impedance Range: 2-2000 ohms
  • Impedance Plotting Scales: 0 to 100 Ohms Min, 0 to 2000 Ohms Max
  • Impedance formats: resistance, reactance, Z, Z Angle, SWR, R, S11 Vector, Gain
    and Gain Phase
  • Phase Angle Plotting Scales: +/- 15 to +/- 180 degrees
  • Harmonic and spurious: >30 dB below fundamental
  • Output power: ~+5dBm @ 50 ohms
  • Serial interface speeds: 4800 to 57.6K bps
  • Power Requirements: 14-20 VDC @ 400 mA minimum or 8 AA (alkaline or NiMH)
  • Antenna Connector: N Connector
  • Size: 8.5" x 4.3" x 2.25:
  • Weight: 20 ounces